
Jiangsu Changjing Electronics Technology Co., Ltd
Alternative with higher power ratings, but increased capacitance may affect high-speed signals.
SRV05-4LA 4A is a low-capacitance TVS array in a SOT23-6L package, designed to protect high-speed data lines. When searching for a replacement, it's crucial to match the 5V working voltage, low capacitance (≤0.5pF), and verify the pinout configuration.
All promising candidates use the same SOT23-6L package.
Candidates may have higher capacitance, which can affect signal integrity on high-speed lines.
This is a passive component, so no firmware changes are expected.
Direct replacement for SRV05-4LA 4A should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
Review SRV05-4.TCT-JSM for its superior electrical specs, but prioritize pinout verification from its datasheet.
Pinout mismatch is the primary risk, as SOT23-6L TVS arrays have multiple common pin configurations.

Jiangsu Changjing Electronics Technology Co., Ltd
Alternative with higher power ratings, but increased capacitance may affect high-speed signals.
| Feature / factor | SRV05-4LA 4A | ESDUEG5V0T4 | SRV05-4.TCT-JSM | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Package | SOT23-6L | SOT-23-6L | SOT-23-6L | SOT-23-6L — Package matches.; SRV05-4.TCT-JSM: Package matches. | |
| Power | 60W | 100W | - | 100W — Higher peak power rating. | |
| Current | 4.0A | 5.0A | 5.0A | 5.0A — Higher peak pulse current.; SRV05-4.TCT-JSM: Higher peak pulse current provides more headroom. | |
| Capacitance | 0.5pF | 0.8pF | 0.35pF | 0.8pF / 0.35pF — Higher capacitance may affect signal integrity.; SRV05-4.TCT-JSM: Lower capacitance is better for high-speed signals. | |
| Voltage | 5.0V | - | 5.0V | 5.0V — Working voltage matches. | |
| Temperature | -40°C to 85°C | - | -55°C to +125°C | -55°C to +125°C — Wider operating temperature range. |
Verified drop-in options for SRV05-4LA 4A are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.