
Micro Commercial Co
A pin-compatible upgrade with higher voltage (60V) and current (5A) ratings and comparable forward voltage.
SS24A is a 40V, 2A Schottky rectifier in a common SMA package, valued for its low forward voltage. When seeking a replacement, key parameters are voltage, current, and especially forward voltage (Vf) to maintain efficiency.
Forward voltage (Vf) varies significantly among alternatives, impacting efficiency and heat.
The DO-214AC (SMA) package is a common industry standard with consistent dimensions.
Many manufacturers produce Schottky diodes with similar ratings in this package.
Direct replacement for SS24A should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
SK56A-LTP offers an upgrade in voltage and current with a similar forward voltage, making it the most suitable replacement.
The primary risk is selecting a part with a higher forward voltage (Vf), which will increase power dissipation and lower circuit efficiency.

Micro Commercial Co
A pin-compatible upgrade with higher voltage (60V) and current (5A) ratings and comparable forward voltage.
| Feature / factor | SS24A | SK56A-LTP | SS56 | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Package | DO-214AC (SMA) | DO-214AC (SMA) | DO-214AC (SMA) | DO-214AC (SMA) — Same package and pinout.; SS56: Same package and pinout. | |
| Voltage | 40V | 60V | 60V | 60V — Higher voltage rating provides more design margin.; SS56: Higher voltage rating. | |
| Current | 2A | 5A | 5A | 5A — Higher current rating provides more design margin.; SS56: Higher current rating. | |
| Forward Voltage | 0.5V @ 2A (max) | ~0.45V @ 2A (typ) | 0.7V @ 5A (max) | ~0.45V @ 2A (typ) / 0.7V @ 5A (max) — Comparable Vf ensures similar efficiency. Check datasheet graph.; SS56: Vf may be higher than target, check datasheet for value at 2A. |
Verified drop-in options for SS24A are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.