Is there a pin-compatible replacement for SXA-001T-P0.6?

A true pin-compatible replacement must be mechanically identical to fit the JST XA series housing. No candidates in this review were confirmed to be pin-compatible. Users must always verify mechanical drawings before substitution.

What risks should I check before replacing SXA-001T-P0.6?

The main risk is mechanical incompatibility. Ensure the substitute contact fits the XA housing and locks correctly. Also, verify the wire gauge range, current/voltage ratings, and material plating to prevent connection failures.

SXA-001T-P0.6 Alternatives, Datasheet & Cross Reference | JST

Finding a substitute for the JST SXA-001T-P0.6 crimp contact requires matching the XA connector series, 2.5mm pitch, and 28-22 AWG wire range. Alternatives require careful verification of mechanical compatibility to ensure they fit the intended XA housing.

AI replacement insight

Package riskhigh

Contact body shape is critical and specific to the connector series. Mismatch will cause assembly failure.

Electrical risklow

Key electrical ratings like current and voltage are common and easy to match.

Sourcing riskmedium

While the XA series is common, finding a verified cross-reference requires careful datasheet comparison.

Can it be replaced directly?

No direct, verified drop-in replacement was found in this review. The main barrier is matching the mechanical form factor of the JST XA series contact.

Best replacement path

Search for contacts specified for the 'JST XA' series from other manufacturers or check for official JST cross-references.

Main risk

Mechanical incompatibility. Using a contact from a different connector series will result in it not fitting the connector housing.

Recommended alternatives

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Alternative comparison matrix

Feature / factor	SXA-001T-P0.6	XHY-T	Compatibility / risk
Package	XA-type Crimp Contact	XH-type	XH-type — Candidate is for XH series, target is for XA series. Not mechanically compatible.
Pitch	2.5 mm	2.50 mm	2.50 mm — Pitch matches, but this does not guarantee mechanical fit.
Wire Gauge	28-22 AWG	28-20 AWG	28-20 AWG — Candidate supports a wider wire range.
Current	3 A	3 A	3 A — Current rating matches.
Voltage	250 V	250 V	250 V — Voltage rating matches.

Application & sourcing insights

Questions & answers

The best alternative is another contact from the JST XA series or a manufacturer part explicitly verified as a cross-reference. While parts like XHY-T have similar electrical specs, they are for different connector systems (XH-type) and are not direct replacements.