
Diodes Incorporated
AP22811AW5-7 is a strong indexed candidate if 2.7V minimum VIN is acceptable.
SY6288CAAC is a 2A active-high SOT23-5 power distribution switch. Several candidates exist, but pinout and low-VIN checks are important.
Some parts need 2.7V min or use higher OCP limits.
SOT23-5, SOT-25, and TSOT-23-5 need footprint checks.
Enable and fault signals are simple logic pins.
Some candidates are external or NRND.
Direct replacement for SY6288CAAC should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
Start with SY6288C20AAC or SY20808C20AAC, then check AP22811AW5-7 if 2.7V minimum VIN is acceptable.
Unparsed pin order and different current-limit thresholds.

Diodes Incorporated
AP22811AW5-7 is a strong indexed candidate if 2.7V minimum VIN is acceptable.
| Feature / factor | SY6288CAAC | SY6288C20AAC | AP22811AW5-7 | AP22802AW5-7 | Compatibility / risk |
|---|---|---|---|---|---|
| Package | SOT23-5 | SOT-23-5 | SOT-25 | SOT25 | SOT-23-5 / SOT-25 / SOT25 / TSOT-23-5 — catalog; AP22811AW5-7: footprint check; AP22802AW5-7: footprint check; RT9742CGJ5F: height/footprint |
| Pinout | not parsed | OUT/GND/OCB/EN/IN | OUT/GND/FLG/EN/IN | OUT/GND/FLG/EN/IN | OUT/GND/OCB/EN/IN / OUT/GND/FLG/EN/IN / not parsed — target gap; AP22811AW5-7: official claim; AP22802AW5-7: official claim; RT9742CGJ5F: missing |
| Voltage | 2.5-5.5V | 2.5-5.5V | 2.7-5.5V | 2.7-5.5V | 2.5-5.5V / 2.7-5.5V / 2.7-6V — official claim; AP22811AW5-7: low VIN gap; AP22802AW5-7: low VIN gap; RT9742CGJ5F: 2.5V gap |
| Current | 2A | 2A | 2A | 2A | 2A — official claim; AP22811AW5-7: same; AP22802AW5-7: same; RT9742CGJ5F: catalog |
| Lifecycle | Active | unknown | - | NRND | unknown / NRND — catalog nan; AP22802AW5-7: avoid new design |
| Temperature | -40 to 85C | - | -40 to 85C | - | -40 to 85C — catalog |
| Interface | EN high, OCB | - | - | - | FLG, discharge — EN not shown |
Verified drop-in options for SY6288CAAC are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.