Is there a pin-compatible replacement for TC1262-3.3VDBTR?

While many parts like the AMS1117-3.3 family share the SOT-223 package and a similar pinout, they are not electrically pin-to-pin compatible for all applications. Critical differences in dropout voltage and quiescent current mean they are not direct drop-in replacements and require engineering review.

What risks should I check before replacing TC1262-3.3VDBTR?

Key risks include: 1) Electrical: Substitutes may have higher dropout voltage, preventing regulation if input voltage is low. 2) Power Consumption: Alternatives often have much higher quiescent current, draining batteries faster. 3) Thermal: Ensure the substitute's temperature range matches the application. 4) Package: Some alternatives require a PCB layout change.

TC1262-3.3VDBTR Alternatives, Datasheet & Cross Reference | MICROCHIP

The TC1262-3.3VDBTR is a 3.3V, 500mA CMOS Low-Dropout (LDO) regulator in a SOT-223 package, known for its low quiescent current and low dropout voltage. Finding a direct replacement requires careful matching of these key electrical parameters.

AI replacement insight

Electrical riskhigh

Mismatch in dropout voltage and quiescent current can cause system failure or high power drain.

Package riskmedium

Some electrically superior parts require a PCB layout change.

Sourcing risklow

Many alternatives are widely available from multiple vendors.

Can it be replaced directly?

No direct, fully-compatible drop-in replacement has been identified. All candidates require engineering review due to significant differences in key electrical parameters like dropout voltage and quiescent current.

Best replacement path

For drop-in, review AMS1117-family parts for non-critical applications; for new designs, select a modern LDO with matching dropout and quiescent current, even if it requires a layout change.

Main risk

The primary risk is substituting a modern CMOS LDO (the target) with an older bipolar LDO (like AMS1117), leading to regulation failure or excessive power consumption.

Recommended alternatives

Shares the same package and temperature range, but critical electrical differences require careful engineering validation.

View details

Alternative comparison matrix

Feature / factor	TC1262-3.3VDBTR	AMS1117-3.3	NCP1117LPST33T3G	SSP7903P33PR	Compatibility / risk
Package	SOT-223	SOT-223-3L	SOT-223	SOT89-3L	SOT-223-3L / SOT89-3L — Package matches, likely footprint compatible.; NCP1117LPST33T3G: Package matches, likely footprint compatible.; SSP7903P33PR: Different package requires PCB redesign.
Temperature	-40°C to 125°C	-40°C to 125°C	0°C to 125°C	-40°C to 85°C	-40°C to 125°C / -40°C to 85°C — Operating temperature range matches the target.; NCP1117LPST33T3G: Reduced operating range at low temperatures.; SSP7903P33PR: Reduced maximum operating temperature.
Current	80µA	>5mA (typical)	550µA	1.6µA	>5mA (typical) / 550µA / 1.6µA — Very high quiescent current compared to target's 80µA.; NCP1117LPST33T3G: Much higher quiescent current, unsuitable for low-power/battery applications.; SSP7903P33PR: Significantly lower quiescent current is a major upgrade.
Voltage	350mV @ 0.5A	~1.3V @ 1A	~1.3V @ 1A	~400mV @ 0.5A	~1.3V @ 1A / ~400mV @ 0.5A — Significantly higher dropout voltage is a critical risk.; NCP1117LPST33T3G: Significantly higher dropout voltage. Risk of regulation failure if Vin is low.; SSP7903P33PR: Dropout voltage is comparable to the target.

Application & sourcing insights

Questions & answers

The best alternative depends on the application. For designs where a board redesign is possible, parts like the SSP7903P33PR offer similar electrical performance but in a different package. For drop-in, AMS1117-3.3 variants exist in the same package but have higher dropout voltage and quiescent current, which must be verified.