
Texas Instruments
A functional alternative in the same package, but with a lower 3A current rating and different operating frequency.
Find and compare alternatives for the Texas Instruments TPS565201DDCR, a 5A synchronous step-down converter. This analysis reviews potential substitutes, highlighting key electrical and package differences to guide your selection.
Substitutes have lower current ratings and different switching characteristics, requiring circuit redesign.
The best candidate, TPS563249DDCR, shares the same SOT-23-THIN package, but pinout must be verified.
No, there are no direct, drop-in replacements for TPS565201DDCR among the candidates reviewed. All potential alternatives require significant engineering review.
The best path is to evaluate TPS563249DDCR for applications that can tolerate a lower 3A output current and accommodate changes to external components due to a different switching frequency.
The primary risk is the lower output current capability of potential substitutes, which could cause system failure if the load exceeds the substitute's rating.

Texas Instruments
A functional alternative in the same package, but with a lower 3A current rating and different operating frequency.
| Feature / factor | TPS565201DDCR | TPS563249DDCR | Alt 2 | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Package | SOT-23-THIN (DDC) | SOT-23-THIN (DDC) | SOT-23-THIN (DDC) — Package matches, increasing likelihood of fit. | ||
| Voltage | 4.5 V to 17 V | 4.5 V to 17 V | 4.5 V to 17 V — Input voltage range is identical. | ||
| Current | 5 A | 3 A | 3 A — Output current is a significant downgrade. | ||
| Switching Frequency | 500 kHz | 1.4 MHz | 1.4 MHz — Higher frequency requires recalculating external inductor and capacitors. | ||
| Control Mode | D-CAP2 | D-CAP3 | D-CAP3 — Different control architecture may affect loop stability and transient response. | ||
| Pinout | 6-pin DDC | Unknown | Unknown — Pinout must be verified via datasheet comparison. |
The best potential alternative found is TPS563249DDCR, but it is a downgrade with only 3A output current versus the original 5A. This requires careful engineering validation for your specific application.