TS-1002ST-26C
XUNPU
Needs validationmedium risk
Matches operating force and footprint but has a taller 7.3mm actuator.
Best Alternatives to TS-1002S-05026C
The XUNPU TS-1002S-05026C is a common 6x6mm through-hole tactile switch with a 5mm actuator height and a 260gf operating force. It is widely used in consumer electronics, appliances, and control panels for user input.
AI replacement insight
Electrical risklow
Voltage/current ratings are standard for this type of switch.
Package riskmedium
Actuator height is a common variable and must be verified for fit.
Firmware risklow
These are simple mechanical switches with no firmware.
Can it be replaced directly?
No direct drop-in replacement with identical key parameters has been identified. The closest options involve a trade-off between actuator height and operating force. Review is required.
Best replacement path
For mechanical fit, UK-B0228-G5-160-JZ is a strong candidate due to its matching 5mm height, but requires validating the lower 160gf operating force. For matching the 260gf force, consider other parts in the XUNPU TS-1002S series, but be prepared to accommodate a different actuator height.
Main risk
The primary risk is a mismatch in either actuator height, affecting mechanical assembly, or operating force, affecting the user experience and function.
Recommended alternatives
2Alternative comparison matrix
| Feature / factor | TS-1002S-05026C | TS-1002ST-26C | UK-B0228-G5-160-JZ | KH-6X6X6H-ZJ | Compatibility / risk |
|---|---|---|---|---|---|
| Actuator Height | 5mm | 7.3mm | 5mm | 6mm | 7.3mm / 5mm / 6mm — Taller actuator requires mechanical check.; UK-B0228-G5-160-JZ: Matches target height.; KH-6X6X6H-ZJ: Slightly taller. |
| Operating Force | 260gf | 2.6N (~265gf) | 160gf | 130gf | 2.6N (~265gf) / 160gf / 130gf — Matches target force.; UK-B0228-G5-160-JZ: Significantly lower force, affects feel.; KH-6X6X6H-ZJ: Much lower force. |
| Package | 6x6mm, 4-pin TH | 6x6mm, 4-pin TH | 6x6mm, 4-pin TH | 6x6mm, 4-pin TH | 6x6mm, 4-pin TH — Matches footprint.; UK-B0228-G5-160-JZ: Matches footprint.; KH-6X6X6H-ZJ: Matches footprint. |
| Electrical Rating | 12V/50mA | 12V/50mA | 12V/50mA | - | 12V/50mA — matched; UK-B0228-G5-160-JZ: matched |
| Contact Resistance | <100mΩ | - | - | ≤30 mΩ | ≤30 mΩ — Lower is better. |
Application & sourcing insights
Questions & answers
The best alternative depends on your priority. For the same physical size, UK-B0228-G5-160-JZ has a matching 5mm height but a lower operating force (160gf). If operating force is critical, parts from the same XUNPU TS-1002S series like TS-1002ST-26C offer the same 260gf force but have different actuator heights.