Is there a pin-compatible replacement for TSD001A05035A?

Yes, several 6x6mm through-hole switches like ALPSALPINE SKHHAMA010 and BZCN TSD001A05526A are pin-compatible. However, none found have the same 350gf operating force, so they are not drop-in functional equivalents.

What risks should I check before replacing TSD001A05035A?

The main risk is the difference in operating force. A lower force (e.g., 160gf) will feel much lighter than the original 350gf. Also, check the actuator height to ensure it fits your enclosure and user interface design.

TSD001A05035A Alternatives, Datasheet & Cross Reference | Zhejiang Bozhong Electric Co., Ltd.

The BZCN TSD001A05035A is a 6x6mm through-hole tactile switch with a 5mm actuator height and a 350gf operating force, rated for 12V/50mA. Finding a direct replacement requires matching these mechanical and electrical specifications.

AI replacement insight

Electrical risklow

The 12V/50mA rating is standard and easily matched.

Package riskmedium

While the 6x6mm footprint is common, actuator height and tactile feel (force) must be verified.

Firmware risklow

Not applicable for a simple mechanical switch.

Can it be replaced directly?

No direct pin-for-pin replacement with an identical 350gf operating force has been identified. All viable alternatives require verifying the impact of a different operating force.

Best replacement path

The closest alternatives, like ALPSALPINE's SKHHAMA010, match the size and electrical rating but have a significantly lower operating force.

Main risk

The primary risk is the change in operating force, which affects the user's tactile feel and could be critical in some applications.

Recommended alternatives

A form-fit alternative from Alps Alpine with a much lower operating force.

View details

Alternative comparison matrix

Feature / factor	TSD001A05035A	SKHHAMA010	TSD001A05526A	Compatibility / risk
Package	6x6mm Through-Hole	6x6mm Through-Hole	6x6mm Through-Hole	6x6mm Through-Hole — Footprint and height match target.; TSD001A05526A: Footprint matches target.
Actuator Height	5.0mm	5.0mm	5.5mm	5.0mm / 5.5mm — Height matches target.; TSD001A05526A: Taller actuator may cause mechanical interference.
Current	12V / 50mA	12V / 50mA	12V / 50mA	12V / 50mA — Electrical rating matches.; TSD001A05526A: Electrical rating matches.
Operating Force	350gf	160gf (1.57N)	260gf	160gf (1.57N) / 260gf — Significantly lower force, affects tactile feel.; TSD001A05526A: Significantly lower force, affects tactile feel.

Application & sourcing insights

Questions & answers

ALPSALPINE SKHHAMA010 is a strong alternative, matching the 6x6mm size, 5mm height, and electrical ratings. However, its operating force is much lower (160gf vs 350gf), which must be acceptable for your application.