SEUC236T5V4U
ElecSuper
Needs validationlow risk
Strong parametric match from the same manufacturer; pinout verification is required.
Best Alternatives to USBLC6-4SC6-ES
The USBLC6-4SC6-ES is a 4-line, 5V TVS diode with ultra-low 0.6pF capacitance in a SOT-23-6L package, ideal for protecting high-speed data lines. Alternatives must match its low capacitance to maintain signal integrity.
AI replacement insight
Electrical riskhigh
Capacitance mismatch can cause signal integrity failure.
Package riskmedium
While the package is the same, pinout must be verified to avoid board redesign.
Can it be replaced directly?
Direct replacement for USBLC6-4SC6-ES should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
Best replacement path
SEUC236T5V4U from the same manufacturer offers a nearly identical parametric profile. SRV05-4.TCT-JSM is a potential upgrade with even lower capacitance. Both require pinout verification from their datasheets.
Main risk
The primary risk is substituting with a part that has higher capacitance, which can degrade high-speed signals like USB 2.0 and impact system performance.
Recommended alternatives
3Alternative comparison matrix
| Feature / factor | USBLC6-4SC6-ES | SEUC236T5V4U | SRV05-4.TCT-JSM | RCLAMP0504S.TCT | Compatibility / risk |
|---|---|---|---|---|---|
| Package | SOT-23-6L | SOT-23-6L | SOT-23-6L | SOT-23 6L | SOT-23-6L / SOT-23 6L — Package matches, enabling form-factor compatibility.; SRV05-4.TCT-JSM: Package matches, enabling form-factor compatibility.; RCLAMP0504S.TCT: Package is a match. |
| Application | 4 | 4 | - | - | 4 — Matches the target's 4 protected lines. |
| Voltage | 5V | 5V | 5V | 5V | 5V — Working voltage is identical.; SRV05-4.TCT-JSM: Working voltage is identical.; RCLAMP0504S.TCT: Working voltage is identical. |
| Capacitance | 0.6pF | 0.6pF | 0.35pF | < 3pF | 0.6pF / 0.35pF / < 3pF — Ultra-low capacitance matches, suitable for high-speed lines.; SRV05-4.TCT-JSM: Lower capacitance is an upgrade for high-speed signals.; RCLAMP0504S.TCT: Significantly higher capacitance may degrade high-speed signals. |
| Power | 60W | 60W | Not specified | 150W | 60W / Not specified / 150W — Peak pulse power rating is identical.; SRV05-4.TCT-JSM: Peak pulse power rating is not available for direct comparison.; RCLAMP0504S.TCT: Higher power rating is an improvement. |
| Esd Rating | ±12kV / ±17kV | - | ±16kV / ±27kV | - | ±16kV / ±27kV — Higher ESD ratings (contact/air) provide better protection. |
Application & sourcing insights
Questions & answers
Verified drop-in options for USBLC6-4SC6-ES are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.