What risks should I check before replacing WF-1A200A3P?

Before replacing, you must verify the mechanical dimensions from the datasheet. Check the housing size, pin length, and PCB footprint to ensure a correct fit. For alternatives with lower voltage or current ratings, confirm your application's electrical requirements are not exceeded.

WF-1A200A3P Alternatives, Datasheet & Cross Reference | BXCONN

The BXCONN WF-1A200A3P is a standard 3-pin, 2.0mm pitch straight male header. Several potential replacements are available, including a likely pin-compatible option from the same manufacturer and other functional alternatives.

AI replacement insight

Package risklow

Multiple candidates match the straight, through-hole, 2.0mm pitch form factor. Verification of detailed mechanical drawings is still required.

Electrical risklow

Several candidates match the 250V, 2.0A rating. Downgrade options exist but are clearly marked.

Sourcing risklow

This is a common connector type with multiple manufacturers available, indicating a healthy supply chain.

Can it be replaced directly?

Direct replacement for WF-1A200A3P should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.

Best replacement path

Start with Datasheet verified or Strong match candidates for WF-1A200A3P, then review parametric alternatives for package and electrical fit.

Main risk

The primary risk is mechanical incompatibility. While pitch and pin count may match, slight differences in housing dimensions or pin length can prevent a proper fit. This risk is lowest with WF-1E200A3P.

Recommended alternatives

A likely pin-compatible alternative from the same manufacturer with matching key electrical and mechanical specs.

View details

Alternative comparison matrix

Feature / factor	WF-1A200A3P	WF-1E200A3P	WAFER-PH200Z-3A	ZX-PH2.0-3PJK	Compatibility / risk
Package	Through Hole, Straight	Through Hole, Straight	Through Hole, Straight	Through Hole, Straight	Through Hole, Straight — Mounting type and orientation match.; WAFER-PH200Z-3A: Mounting type and orientation match.; ZX-PH2.0-3PJK: Mounting type and orientation match.
Pitch Mm	2.0mm	2.0mm	2.0mm	-	2.0mm — Pin pitch is identical.; WAFER-PH200Z-3A: Pin pitch is identical.
Positions	3	3	3	-	3 — Pin count is identical.; WAFER-PH200Z-3A: Pin count is identical.
Current	2.0A	2.0A	2.0A	2.0A	2.0A — Current rating matches.; WAFER-PH200Z-3A: Current rating matches.; ZX-PH2.0-3PJK: Current rating matches.
Voltage	250V	250V	250V	100V	250V / 100V — Voltage rating matches.; WAFER-PH200Z-3A: Voltage rating matches.; ZX-PH2.0-3PJK: Candidate has a lower voltage rating.

Application & sourcing insights

Questions & answers

Verified drop-in options for WF-1A200A3P are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.