Is there a pin-compatible replacement for WJ2EDGR-5.08-10P-14-00A?

No direct pin-to-pin replacement has been verified. While some parts have the same footprint and electrical ratings, they differ in orientation (vertical vs. right-angle), which affects board layout and enclosure compatibility.

What risks should I check before replacing WJ2EDGR-5.08-10P-14-00A?

The main risk is mechanical incompatibility. Check the connector's orientation (right-angle vs. vertical), height, and overall dimensions to ensure it fits your PCB and enclosure. Also, verify the electrical ratings meet your design requirements.

WJ2EDGR-5.08-10P-14-00A Alternatives, Datasheet & Cross Reference | KANGNEX

WJ2EDGR-5.08-10P-14-00A is a 10-position, 5.08mm pitch right-angle pluggable terminal block header. Finding a direct replacement requires careful verification of mechanical dimensions and orientation.

AI replacement insight

Package riskhigh

Orientation mismatch requires layout and enclosure review.

Electrical risklow

Alternatives with matching electrical ratings are available.

Sourcing riskmedium

Cross-vendor options exist but require more extensive validation.

Can it be replaced directly?

No direct, drop-in replacement has been identified. All potential alternatives require mechanical verification, primarily due to differences in mounting orientation.

Best replacement path

Consider the vertical-mount WJ2EDGVC-5.08-10P-14-00A if your design can accommodate the change in orientation.

Main risk

Mechanical form factor, specifically the mounting orientation (right-angle vs. vertical), is the primary risk.

Recommended alternatives

A functional alternative with identical electrical ratings and pitch, but with a vertical instead of right-angle orientation.

View details

Alternative comparison matrix

Feature / factor	WJ2EDGR-5.08-10P-14-00A	WJ2EDGVC-5.08-10P-14-00A	DB2EVC-5.08-10P-GN	Compatibility / risk
Orientation	Right-Angle	Vertical	Vertical (inferred)	Vertical / Vertical (inferred) — Candidate is vertical, target is right-angle. Verify board layout and clearance.; DB2EVC-5.08-10P-GN: Candidate is vertical, target is right-angle.
Pin Count	10	10	-	10 — matched
Pitch	5.08mm	5.08mm	5.08mm	5.08mm — matched; DB2EVC-5.08-10P-GN: matched
Voltage	300V UL / 320V IEC	300V UL / 320V IEC	630V IEC	300V UL / 320V IEC / 630V IEC — matched; DB2EVC-5.08-10P-GN: Higher IEC voltage rating; UL rating is missing.
Current	10A UL / 15A IEC	10A UL / 15A IEC	-	10A UL / 15A IEC — matched
Manufacturer	KANGNEX	-	DORABO	DORABO — Cross-vendor part requires mechanical validation.

Application & sourcing insights

Questions & answers

The best alternative depends on your application's flexibility. WJ2EDGVC-5.08-10P-14-00A from the same manufacturer offers identical electrical specs but has a vertical orientation. Always verify mechanical fit and clearance.