
KANGNEX
A 10-pin, 5.08mm header from the same manufacturer with identical electrical ratings but a right-angle orientation.
WJ2EDGVC-5.08-10P-14-00A is a 10-position, 5.08mm pitch vertical through-hole terminal block header. Finding a direct replacement requires careful verification of mechanical dimensions and electrical ratings.
Orientation or footprint may not match.
Some candidates lack UL ratings.
Alternatives are available from multiple manufacturers.
Direct replacement for WJ2EDGVC-5.08-10P-14-00A should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
Evaluate the right-angle KANGNEX part for mechanical fit, or the vertical DORABO part after verifying its UL ratings and footprint.
Mechanical incompatibility due to orientation (vertical vs. right-angle) or subtle PCB footprint differences between vendors.

KANGNEX
A 10-pin, 5.08mm header from the same manufacturer with identical electrical ratings but a right-angle orientation.
| Feature / factor | WJ2EDGVC-5.08-10P-14-00A | WJ2EDGR-5.08-10P-14-00A | DB2EVC-5.08-10P-GN | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Pinout | Vertical | Right-Angle | Unknown | Right-Angle / Unknown — Orientation differs, affecting mechanical fit.; DB2EVC-5.08-10P-GN: Footprint requires datasheet verification. | |
| Package | Through Hole | Through Hole | - | Through Hole — Both are through-hole mount. | |
| Voltage | 300V UL / 320V IEC | 300V UL / 320V IEC | Missing UL / 630V IEC | 300V UL / 320V IEC / Missing UL / 630V IEC — Voltage ratings are identical.; DB2EVC-5.08-10P-GN: UL rating is missing; IEC rating is higher. | |
| Current | 10A UL / 15A IEC | 10A UL / 15A IEC | Missing UL / 15A IEC | 10A UL / 15A IEC / Missing UL / 15A IEC — Current ratings are identical.; DB2EVC-5.08-10P-GN: UL rating is missing; IEC rating matches. | |
| Manufacturer | KANGNEX | - | DORABO | DORABO — Cross-vendor alternative. |
Verified drop-in options for WJ2EDGVC-5.08-10P-14-00A are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.