Is there a pin-compatible replacement for WPN201610H1R0MT?

Yes, parts like the Murata DFE201610E and TDK TFM201610ALMA series use the same 2016 (0806) footprint. However, a pin-compatible footprint does not guarantee electrical compatibility. You must verify key parameters like saturation current, RMS current, and DCR.

What risks should I check before replacing WPN201610H1R0MT?

The main risk is using a replacement with a lower saturation current (Isat), which can cause the inductor's value to drop sharply under peak current, leading to circuit instability or failure. Also, verify the replacement's height to ensure it doesn't cause mechanical interference.

WPN201610H1R0MT Alternatives, Datasheet & Cross Reference | Shenzhen Sunlord Electronics Co., Ltd.

WPN201610H1R0MT is a 1.0µH power inductor in a 2.0x1.6mm package, commonly used in DC-DC converters. Finding a substitute requires matching its package and inductance while ensuring current ratings (Isat ≥3.85A, Irms ≥2.05A) are met or exceeded.

AI replacement insight

Electrical riskmedium

Many available alternatives have a lower saturation current (Isat) than the target's 3.85A.

Package risklow

Most alternatives are in a standard 2016 (0806) footprint, but component height can vary and must be checked.

Sourcing risklow

1.0µH inductors in a 2016 package are widely available from multiple manufacturers.

Can it be replaced directly?

No direct drop-in replacement with identical or better specs in the exact same package dimensions has been identified. The closest match, DFE201612E-1R0M=P2, is slightly taller.

Best replacement path

The Murata DFE201612E-1R0M=P2 offers superior electrical performance but is 0.2mm taller. Verify mechanical clearance before use.

Main risk

The primary risk is using an alternative with a lower saturation current (Isat), which can cause the inductor to saturate and fail under peak load.

Recommended alternatives

Electrically superior alternative with higher current ratings and lower DCR, but verify mechanical fit due to increased height.

View details

Alternative comparison matrix

Feature / factor	WPN201610H1R0MT	DFE201612E-1R0M=P2	TFM201610ALMA1R0MTAA	DFE201610E-1R0M=P2	Compatibility / risk
Package	2016 (1.0mm height)	2016 (1.2mm height)	2016	2016 (0806)	2016 (1.2mm height) / 2016 (0806) — Candidate is 0.2mm taller.; TFM201610ALMA1R0MTAA: Package size matches.; DFE201610E-1R0M=P2: Package size and height match.
Saturation Current A	3.85 A	4.0 A	3.3 A	3.6 A	4.0 A / 3.3 A / 3.6 A — Slightly higher Isat.; TFM201610ALMA1R0MTAA: Lower Isat is a downgrade risk.; DFE201610E-1R0M=P2: Lower Isat is a downgrade risk.
Current A	2.05 A	2.9 A	3.3 A	2.7 A	2.9 A / 3.3 A / 2.7 A — Significantly higher Irms (per evidence).; TFM201610ALMA1R0MTAA: Higher Irms is an upgrade.; DFE201610E-1R0M=P2: Higher Irms is an upgrade (per evidence).
Dcr Ohm	0.07 ohm	0.048 ohm	0.06 ohm	0.057 ohm	0.048 ohm / 0.06 ohm / 0.057 ohm — Lower DCR improves efficiency.; TFM201610ALMA1R0MTAA: Lower DCR improves efficiency.; DFE201610E-1R0M=P2: Lower DCR improves efficiency.
Application	Standard	-	AEC-Q200	-	AEC-Q200 — Automotive grade is a potential benefit.

Application & sourcing insights

Questions & answers

The Murata DFE201612E-1R0M=P2 is the best electrical alternative, offering higher current ratings and lower resistance. However, it is 0.2mm taller, so you must verify it fits mechanically in your design.