
HCTL
A 4-pin, 2.5mm pitch straight header with matching electrical ratings. A likely form-fit-function replacement.
XH-4A is a standard 4-pin, 2.5mm pitch straight through-hole header used in wire-to-board applications. Finding a suitable replacement involves matching the orientation and electrical ratings, with strong candidates available from other manufacturers.
Many parts have the same pitch but different orientation (straight vs. right-angle) or shrouding. Datasheet verification is critical.
Most XH-style connectors in this class have similar 3A/250V ratings, but some low-cost versions may have lower voltage ratings.
Direct replacement for XH-4A should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
The HCTL HC-XHB-4A is the most promising alternative, matching all key electrical and mechanical parameters. However, a full datasheet comparison of mechanical drawings is required to confirm it is a true pin-for-pin replacement.
The primary risk is mechanical incompatibility. Many similar parts exist with a right-angle orientation, which will not fit on a PCB designed for a straight header.

HCTL
A 4-pin, 2.5mm pitch straight header with matching electrical ratings. A likely form-fit-function replacement.
| Feature / factor | XH-4A | HC-XHB-4A | ZX-XH2.54-4PLT | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Pinout | 4 | 4 | - | 4 — Pin count matches. | |
| Pitch | 2.5mm | 2.5mm | - | 2.5mm — Pitch matches. | |
| Package | Through Hole, Straight | Through Hole, Straight | Through Hole, Right Angle | Through Hole, Straight / Through Hole, Right Angle — Mounting type and orientation appear to match.; ZX-XH2.54-4PLT: Orientation is right-angle, target is straight. | |
| Voltage | 250V | 250V | 250V | 250V — Voltage rating matches.; ZX-XH2.54-4PLT: Voltage rating matches. | |
| Current | 3A | 3A | 3A | 3A — Current rating matches.; ZX-XH2.54-4PLT: Current rating matches. |
Verified drop-in options for XH-4A are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.