Is there a pin-compatible replacement for XHB-4A?

Yes, JST's B4B-XH-A(LF)(SN) and HCTL's HC-XHB-4A are very likely pin-compatible replacements. They share the same 4-pin, 1-row, 2.5mm pitch, and straight through-hole configuration. However, you should always verify the PCB footprint in the datasheet before ordering.

What risks should I check before replacing XHB-4A?

Before replacing XHB-4A, check three main risks: 1) Mechanical Fit: Ensure the PCB footprint and connector height match. 2) Electrical Ratings: Verify the voltage and current ratings are equal to or greater than the original's 250V/3A. 3) Mating Compatibility: Confirm the replacement will correctly mate with your existing wire housing.

XHB-4A Alternatives, Datasheet & Cross Reference | Husky Portable Containment

The FG XHB-4A is a 4-pin, 2.5mm pitch straight male header, a common clone of the JST XH connector series. Several pin-compatible alternatives are available, including the original JST part and other cross-vendor clones.

AI replacement insight

Package riskmedium

Clones may have slight dimensional variations. Datasheet footprint and height verification is critical.

Electrical risklow

Most clones match the 3A/250V rating, but some (like BOOMELE's) have lower voltage ratings and must be avoided.

Sourcing risklow

This is a very common connector style with many manufacturers, making sourcing generally easy.

Can it be replaced directly?

Yes, there are several direct replacements for the XHB-4A. The original part from JST, B4B-XH-A(LF)(SN), and clones like HCTL's HC-XHB-4A are strong candidates, matching key specs like 4-pins, 2.5mm pitch, and 3A/250V rating.

Best replacement path

The best replacement is the original JST part, B4B-XH-A(LF)(SN), which offers the highest confidence in compatibility.

Main risk

The main risk is mechanical incompatibility. While many clones exist, slight variations in the plastic shroud dimensions or pin length can prevent proper mating. Always verify with datasheets.

Recommended alternatives

Original JST part with matching key specs; likely a pin-compatible replacement for the FG clone.

View details

Alternative comparison matrix

Feature / factor	XHB-4A	B4B-XH-A(LF)(SN)	HC-XHB-4A	XHB-4A	Compatibility / risk
Application	FG	JST	-	-	JST — This is the original JST part that the target is a clone of.
Package	Through Hole, Straight	Through Hole, Straight, Shrouded	Through Hole, Straight	Through Hole, Straight	Through Hole, Straight, Shrouded — Matches form and orientation.; HC-XHB-4A: Matches form and orientation.
Current	3A	3A	3A	Not specified	3A / Not specified — matched; HC-XHB-4A: matched; XHB-4A: Current rating must be verified from datasheet.
Voltage	250V	250V	250V	50V	250V — matched; HC-XHB-4A: matched; XHB-4A: Significantly lower voltage rating.
Temperature	-25°C to +85°C	-25°C to +85°C	-	-	-25°C to +85°C — matched

Application & sourcing insights

Questions & answers

The best alternative to XHB-4A is the original JST part, B4B-XH-A(LF)(SN). It is the part this and other clones are based on, ensuring the highest likelihood of mechanical and electrical compatibility.