XC32M4-8.000-F12NLDTL
Suzhou Hangjing Elec & Tech Co., Ltd.
Needs validationmedium risk
8MHz 3225 crystal candidate with matching 12pF load, but temperature and pinout need review.
Best Alternatives to XL2OI-111-8M
XL2OI-111-8M is an 8MHz 3225 passive crystal. Listed alternatives need FAE review before use.
AI replacement insight
Electrical riskmedium
stability or load may differ
Package risklow
3225-4P is listed
Firmware risklow
same nominal 8MHz only
Sourcing riskmedium
lifecycle is not clear
Can it be replaced directly?
Direct replacement for XL2OI-111-8M should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.
Best replacement path
Start with XC32M4-8.000-F12NLDTL, then verify pinout, stability and temp range.
Main risk
Temperature coverage and missing pinout evidence.
Recommended alternatives
2Alternative comparison matrix
| Feature / factor | XL2OI-111-8M | XC32M4-8.000-F12NLDTL | XC32M4-8.000-F10LJDT | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Package | SMD3225-4P | SMD3225-4P | SMD3225-4P | SMD3225-4P — same size; XC32M4-8.000-F10LJDT: same size | |
| Pinout | 4P | 4P | 4P | 4P — pin function missing; XC32M4-8.000-F10LJDT: pin function missing | |
| Application | 8MHz AT fund. | 8MHz AT fund. | 8MHz | 8MHz AT fund. — same nominal freq; XC32M4-8.000-F10LJDT: freq matches | |
| Interface | 12pF load | 12pF load | 10pF load | 12pF load / 10pF load — load matches; XC32M4-8.000-F10LJDT: network change likely | |
| Temperature | -40 to +85C | -20 to +70C | -20 to +70C | -20 to +70C — does not cover; XC32M4-8.000-F10LJDT: does not cover | |
| Tolerance | ±10ppm, ±20ppm stab | ±10ppm, stab missing | ±20ppm, ±30ppm stab | ±10ppm, stab missing / ±20ppm, ±30ppm stab — stability absent; XC32M4-8.000-F10LJDT: looser accuracy |
Application & sourcing insights
Questions & answers
Verified drop-in options for XL2OI-111-8M are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.