
AMASS
A 3-pin power connector from the same manufacturer with matching voltage and current ratings, but requires board redesign.
The AMASS XT30PW(2+2)-M.G.B is a 4-pin hybrid connector for power and signal, rated for 15A and 500V DC. Finding a direct drop-in replacement is challenging due to its specific 2+2 pin configuration.
Footprint and pinout mismatch is guaranteed with available candidates.
Alternatives with matching electrical ratings are available.
No direct pin-compatible replacement has been identified. Alternatives require PCB layout changes and functional verification.
Consider other connectors from the AMASS XT or MR series if the 2+2 pin hybrid function is not strictly required. A board redesign will likely be necessary.
The primary risk is mechanical and functional incompatibility. The target's 2+2 hybrid pinout is unique, and substitutes will likely have a different footprint and lack signal pins.

AMASS
A 3-pin power connector from the same manufacturer with matching voltage and current ratings, but requires board redesign.
| Feature / factor | XT30PW(2+2)-M.G.B | MR30PW-M30.G.Y | MR60PW-M.G.B | Alt 3 | Compatibility / risk |
|---|---|---|---|---|---|
| Current | 15 A | 15A | 35 A | 15A / 35 A — Candidate matches target's current rating.; MR60PW-M.G.B: Candidate has a higher current rating. | |
| Voltage | 500 V DC | 500V DC | 500 V DC | 500V DC / 500 V DC — Candidate matches target's voltage rating.; MR60PW-M.G.B: Candidate matches target's voltage rating. | |
| Pinout | 4 | 3 | 3 | 3 — Candidate has 3 pins, target has 4 (2+2). Not pin compatible.; MR60PW-M.G.B: Candidate has 3 pins, target has 4 (2+2). Not pin compatible. | |
| Package | PCB Mount | PCB Mount | PCB Mount (Right Angle) | PCB Mount / PCB Mount (Right Angle) — Both are PCB mount, but footprint differs due to pin count.; MR60PW-M.G.B: Mounting style is right-angle, likely different from target. | |
| Temperature | -20°C to 120°C | -20°C to 120°C | - | -20°C to 120°C — Operating temperature range matches. |
The AMASS MR30PW-M30.G.Y is a functional alternative if only the 15A/500V power connection is needed. It has 3 pins, not 4, and requires a different PCB layout.