ProjectsPricingInsights

Best Alternatives to ZMM15

Package: LL-34Slkor(SLKORMICRO Elec.)DiodesZener Voltage (Nom): 15 VPower Dissipation: 500 mWPackage: LL-34 (MiniMELF)Forward Voltage: 1 V @ 100 mAReverse Leakage Current: < 0.1 µA @ 11 V

ZMM15 is a common 15V, 500mW Zener diode in a surface-mount LL-34 package. Several cross-vendor alternatives with matching key parameters are available, but require verification of tolerance and dynamic impedance.

AI replacement insight

Electrical riskmedium

Tolerance and dynamic impedance must be verified.

Package risklow

LL-34 is a standard package.

Sourcing risklow

Multiple manufacturers produce similar parts.

Can it be replaced directly?

Direct replacement for ZMM15 should use only Datasheet verified or Strong match candidates; many approved options still require engineering review.

Best replacement path

Use a cross-vendor part like YONGYUTAI ZMM15V or ST ZMM15PF-M after verifying secondary electrical parameters from the datasheet.

Main risk

The main risk is a mismatch in Zener voltage tolerance or dynamic impedance (Zzt), which could affect voltage regulation performance.

Recommended alternatives

2
ZMM15PF-M package
ZMM15PF-M

ST (先科)

Needs validationlow risk

A potential pin-compatible 15V, 500mW Zener diode in the same LL-34 package from another manufacturer.

View details

Alternative comparison matrix

Feature / factorZMM15ZMM15PF-MZMM15VAlt 3Compatibility / risk
Voltage15.0V15.0V15.0V15.0V — Nominal Zener voltage matches.; ZMM15V: Nominal Zener voltage matches.
Power0.5W0.5W0.5W0.5W — Power dissipation matches.; ZMM15V: Power dissipation matches.
PackageLL-34LL-34LL-34LL-34 — Package is a physical match.; ZMM15V: Package is a physical match.
ManufacturerSlkor(SLKORMICRO Elec.)ST (先科)YONGYUTAIST (先科) / YONGYUTAI — Cross-vendor alternative.; ZMM15V: Cross-vendor alternative.

Application & sourcing insights

Questions & answers

Verified drop-in options for ZMM15 are limited in the current batch. Review candidates marked Strong match or Datasheet verified, and validate package, pinout, and electrical limits before committing a BOM change.