Is there a pin-compatible replacement for ZX-HY2.0-10PLT?

No pin-compatible replacement is confirmed. All reviewed candidates fail on mechanical compatibility (mounting type or orientation), which prevents a direct, pin-for-pin swap.

What risks should I check before replacing ZX-HY2.0-10PLT?

The most critical risk is the mechanical form factor. You must verify the mounting type (SMT), orientation (vertical), pitch (2.0mm), and the full mechanical dimensions from the datasheet to ensure it fits your PCB layout.

ZX-HY2.0-10PLT Alternatives, Datasheet & Cross Reference | Megastar

ZX-HY2.0-10PLT is a 10-pin, 2.0mm pitch vertical SMT header from Megastar. Finding a direct replacement requires matching the SMT mounting, vertical orientation, and 2.0mm pitch, which is a significant challenge.

AI replacement insight

Package riskhigh

Critical mismatch in mounting type (SMT vs. TH) and/or orientation (Vertical vs. Right-Angle) with all candidates.

Electrical risklow

Most candidates have similar or better electrical ratings, but this is secondary to the package risk.

Sourcing riskmedium

The specific combination of SMT, vertical, 10-pin, 2.0mm pitch may be less common, complicating sourcing.

Can it be replaced directly?

No, there are no known direct, pin-compatible replacements for ZX-HY2.0-10PLT. All reviewed candidates have critical form-factor differences.

Best replacement path

No direct drop-in replacements were found. A replacement requires a PCB layout change to accommodate a different mounting type or orientation.

Main risk

The primary risk is mechanical incompatibility. The target is a vertical SMT header, and alternatives are often through-hole or right-angle, requiring a board redesign.

Recommended alternatives

SMT alternative with different mounting orientation; requires PCB redesign for right-angle placement.

View details

Alternative comparison matrix

Feature / factor	ZX-HY2.0-10PLT	ZX-PH2.0-WT10P	ZX-PHB2.0-2-5PLT	Compatibility / risk
Package	SMT, Vertical	SMT, Right-Angle	Through-Hole, Vertical	SMT, Right-Angle / Through-Hole, Vertical — Candidate is Right-Angle, target is Vertical. Requires PCB redesign.; ZX-PHB2.0-2-5PLT: Candidate is Through-Hole, target is SMT. Requires PCB redesign.
Current	2.0A	2.0 A	3.0 A	2.0 A / 3.0 A — matched; ZX-PHB2.0-2-5PLT: Candidate has a higher current rating.
Voltage	250V AC/DC	250 V AC/DC	250 V AC/DC	250 V AC/DC — matched; ZX-PHB2.0-2-5PLT: matched
Pitch	2.0 mm	2.0 mm	2.0 mm	2.0 mm — matched; ZX-PHB2.0-2-5PLT: matched

Application & sourcing insights

Questions & answers

Currently, no direct drop-in alternatives have been identified. The best path is to search for a 10-pin, 2.0mm pitch, vertical SMT header and verify its mechanical drawing against your PCB layout.