Is there a pin-compatible replacement for ZX-SH1.0-4PWT?

SM04B-SRSS-TB(LF)(SN) and WF-1F100A4P are likely form-fit compatible, but pin-to-pin compatibility must be confirmed by comparing the datasheet PCB layout recommendations. They are not guaranteed drop-in replacements without verification.

What risks should I check before replacing ZX-SH1.0-4PWT?

The main risk is mechanical incompatibility. Always verify the PCB footprint and connector dimensions from the datasheet. Also check for differences in housing material, plating, and mating force if the application is sensitive to these factors.

ZX-SH1.0-4PWT Alternatives, Datasheet & Cross Reference | Megastar

Finding a replacement for the ZX-SH1.0-4PWT 4-pin right-angle header involves matching the 1.0mm pitch and SMT footprint. Several alternatives from JST and BXCONN offer similar performance but require careful footprint verification.

AI replacement insight

Package riskmedium

PCB footprint and mechanical dimensions must be verified from datasheets before procurement.

Electrical risklow

Key electrical ratings like voltage and current match on the best candidates.

Sourcing risklow

Alternatives from major manufacturers like JST are readily available through distribution.

Can it be replaced directly?

No guaranteed drop-in replacement has been verified. However, JST's SM04B-SRSS-TB(LF)(SN) and BXCONN's WF-1F100A4P are strong form-fit candidates that require PCB footprint verification.

Best replacement path

JST's SM04B-SRSS-TB(LF)(SN) is the most promising path due to its widespread availability and industry acceptance as a cross for this connector type.

Main risk

The primary risk is a mismatch in the PCB footprint (pinout and mounting pad dimensions), which could prevent assembly.

Recommended alternatives

Strong cross-vendor alternative from JST with matching key specs and right-angle mount. Footprint verification required.

View details

Alternative comparison matrix

Feature / factor	ZX-SH1.0-4PWT	SM04B-SRSS-TB(LF)(SN)	WF-1F100A4P	ZX-SH1.0-4PLT	Compatibility / risk
Package	Right-Angle SMT	Right-Angle SMT	Right-Angle SMT	Vertical SMT	Right-Angle SMT / Vertical SMT — Mounting style matches. Footprint verification needed.; WF-1F100A4P: Mounting style matches. Footprint verification needed.; ZX-SH1.0-4PLT: Candidate is vertical mount, target is right-angle.
Pin Count	4	4	4	4	4 — matched; WF-1F100A4P: matched; ZX-SH1.0-4PLT: matched
Current	1.0A	1.0A	1A	1.0A	1.0A / 1A — matched; WF-1F100A4P: matched; ZX-SH1.0-4PLT: matched
Voltage	50V	50V	-	50V	50V — matched; ZX-SH1.0-4PLT: matched
Manufacturer	Megastar	JST	-	-	JST — Cross-vendor family match.
Temperature	-25°C to +85°C	-	-40°C to +85°C	-	-40°C to +85°C — Wider operating temperature range.

Application & sourcing insights

Questions & answers

JST's SM04B-SRSS-TB(LF)(SN) and BXCONN's WF-1F100A4P are strong candidates. Both are 4-pin, 1.0mm pitch, right-angle SMT headers with matching electrical ratings, but require footprint verification.