Pulling grips are designed for temporary use to install cables through conduits or trays. Support grips are intended for permanent installation to hold the weight of vertical or horizontal cable runs.
Pulling and Support Grips Component Intelligence
Precision-engineered grips for cable installation, support, and strain relief.
What are Pulling and Support Grips components?
Pulling and support grips are mechanical devices designed to distribute tension across a cable's surface. Pulling grips facilitate installation through conduits, while support grips prevent cable sag and strain in vertical or horizontal runs. Selection hinges on cable diameter, load rating, and environmental exposure.
How to Choose Pulling and Support Grips Components
Selecting the correct grip requires matching mechanical constraints to the cable's physical properties and the installation environment.
Cable Diameter Range
Grips are diameter-specific; ensure the cable OD falls within the grip's effective range to prevent slippage or jacket damage.
Load Rating
Verify the maximum safe working load (SWL) against the cable weight and tension requirements, applying a safety factor for dynamic loads.
Material Compatibility
Choose between galvanized steel for general use or stainless steel for corrosive environments to prevent premature degradation.
Mesh Configuration
Single-weave grips offer flexibility for light loads, while double-weave grips provide higher strength and better tension distribution.
Attachment Type
Select the appropriate eye type—rotating, offset, or closed—based on the pulling hardware and installation path geometry.
Popular Pulling and Support Grips Components
Live| # | Part | Category |
|---|---|---|