Maintained switches stay in the selected position until manually moved, while momentary switches return to a default position when released, similar to a spring-return mechanism.
Selector Switches Component Intelligence
Engineering-grade multi-position control for industrial panels and HMI systems.
What are Selector Switches components?
Selector switches are manual control devices used to route signals or power between multiple circuits. Selection is based on the number of positions, contact block configuration (NO/NC), mounting diameter (typically 16mm or 22mm), and environmental sealing requirements.
How to Choose Selector Switches Components
Selecting the right switch requires balancing mechanical interface with electrical load requirements.
Mounting Diameter
Standardize on 16mm, 22mm, or 30mm cutouts to ensure compatibility with existing panel enclosures and operator interfaces.
Switching Logic
Define the required throw (2-position, 3-position) and action (maintained vs. momentary/spring-return) to match your control logic.
Contact Blocks
Verify the quantity and type (NO/NC) of contact blocks required; ensure they are stackable if complex switching sequences are needed.
Environmental Sealing
Check IP ratings (e.g., IP65, IP67) if the switch will be exposed to dust, moisture, or chemical washdown in industrial settings.
Electrical Ratings
Ensure the switch contact ratings (voltage/current) exceed your circuit's peak load to prevent arcing and premature failure.
Popular Selector Switches Components
Live| # | Part | Category |
|---|---|---|