What should engineers review before using 103H5205-0476?

Review the 42 mm x 42 mm x 33 mm motor body, 5 mm shaft, JST B6B-EH-2-K 6-pin header, required driver circuit, load-speed requirements, permitted shaft loads, and motor temperature limits.

What is the pinout of 103H5205-0476?

Use the 103H5205-0476 datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about 103H5205-0476 pinout to locate pins, power rails, and interface signals before layout.

103H5205-0476 Datasheet, Specs, Alternatives & ECAD | SANYO DENKI CO., LTD.

AI summary

103H5205-0476 is a 42 mm square, 2-phase SANYO DENKI stepping motor rated for 2.88 VDC and 1.2 A/phase, with 0.2 N m minimum holding torque.

Best for

Compact industrial positioning axes
Low-voltage 2-phase stepper drive systems

Avoid if

The application requires a specified encoder, brake, or gearbox
The required torque-speed point exceeds the supplied pull-out torque rating

Check before use

Set the drive to 1.2 A/phase as specified.
Confirm 6-pin connector mating parts are available; the mating connector is not attached.
Validate motor heating and load-speed operation in the final assembly.