What should engineers review before using 160AR5K271M0809G13?

Check correct polarity, peak voltage including ripple, ripple-current heating, 3.5 mm PCB lead spacing, and clearance around the non-insulated case. Do not use it above 105°C or in rapid charge/discharge circuits above 10 A.

What is the pinout of 160AR5K271M0809G13?

Use the 160AR5K271M0809G13 datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about 160AR5K271M0809G13 pinout to locate pins, power rails, and interface signals before layout.

160AR5K271M0809G13 Datasheet, Specs, Alternatives & ECAD | APAQ(钰邦)

AI summary

160AR5K271M0809G13 is a 16 V, 270 µF radial conductive-polymer aluminum capacitor with low 10 mΩ maximum ESR and 5 A ripple-current capability at 105°C.

Best for

Low-ESR power-rail filtering
High-ripple DC output capacitors
Through-hole power electronics

Avoid if

A non-polarized capacitor is required
Voltage can exceed 16 V including ripple peaks
The application requires a fully insulated capacitor case

Check before use

Confirm DC and ripple-voltage derating
Validate ripple current at actual temperature and frequency
Confirm 8 mm × 9 mm mechanical clearance and 3.5 mm lead pitch

Key specifications

Capacitance: 270 µF ±20%
Rated voltage: 16 V
ESR: 10 mΩ max
Ripple current: 5,000 mArms at 105°C, 100 kHz
Temperature range: -55°C to +105°C

Compliance & Environment

RoHS: RoHS

Application

Power-rail filteringIndustrial power electronicsConsumer power supplies

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

It is an APAQ AR5K-series radial conductive-polymer aluminum solid electrolytic capacitor rated 270 µF ±20% and 16 V. The part uses an 8 mm diameter by 9 mm long case with 3.5 mm nominal lead spacing.