What should engineers review before using BCB2YN-450-10.5TS?

Check the four-pin wiring arrangement, board footprint, current limit of 1.0 A maximum, temperature range, and the required inductance test conditions. Compliance and lifecycle information are not provided.

What is the pinout of BCB2YN-450-10.5TS?

Use the BCB2YN-450-10.5TS datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about BCB2YN-450-10.5TS pinout to locate pins, power rails, and interface signals before layout.

BCB2YN-450-10.5TS Datasheet, Specs, Alternatives & ECAD | MINGSTAR(登壹)

AI summary

The BCB2YN-450-10.5TS is a MINGSTAR four-pin data line filter with 45 uH nominal inductance at 100 kHz and 50 mOhm maximum DC resistance.

Best for

Data-line EMI filtering
Through-hole signal-line noise suppression

Avoid if

A documented compliance or lifecycle status is required but cannot be separately verified

Check before use

Pin assignment and PCB footprint
Filtering behavior in the target circuit
Maximum DC current and resistance
RoHS, REACH, and lifecycle status

Key specifications

Inductance at 100 kHz: 45 uH +/-40%
Inductance at 10 kHz: 55 uH +/-40%
Maximum DCR: 50 mOhm
Maximum DC current: 1.0 A

Application

Data-line EMI filteringIndustrial signal filtering

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

It is a MINGSTAR data line filter with four through-hole pins. The specification lists 45 uH +/-40% at 100 kHz, 55 uH +/-40% at 10 kHz, and 50 mOhm maximum DC resistance.