What are the key electrical ratings?

It features a 2A hold current, 3.5A trip current, 6V maximum voltage, and 100A maximum fault current.

What should be considered during PCB assembly?

The device is designed for SMT reflow soldering. Avoid hand soldering if possible; if necessary, keep the iron at least 1.5mm away from the device and limit contact to 3 seconds at <350°C.

How does temperature affect performance?

The hold current decreases as ambient temperature increases. Refer to the thermal derating chart in the datasheet for operation above 25°C.

What is the sourcing risk?

The part is currently available with moderate stock levels; however, verify lead times for high-volume production.

What is the pinout of BSMD1206-200-6V?

Use the BSMD1206-200-6V datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about BSMD1206-200-6V pinout to locate pins, power rails, and interface signals before layout.

BSMD1206-200-6V Datasheet, Specs, Alternatives & ECAD | BHFUSE

Q: What is the BSMD1206-200-6V?

It is a polymer PTC (PPTC) resettable fuse designed to protect electronic circuits from overcurrent faults.

Q: How does temperature affect performance?

The hold current decreases as ambient temperature increases. Refer to the thermal derating chart in the datasheet for operation above 25°C.

Q: What is the sourcing risk?

The part is currently available with moderate stock levels; however, verify lead times for high-volume production.

Q: What is the pinout of BSMD1206-200-6V?

Use the BSMD1206-200-6V datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about BSMD1206-200-6V pinout to locate pins, power rails, and interface signals before layout.