Is there a pin-compatible replacement for HCZZ0039-2?

Several parts like WF-1E100A2P are strong functional matches, but pin-to-pin compatibility must be confirmed by comparing the mechanical drawings and footprint dimensions in the datasheets. Minor variations can prevent a direct fit.

What risks should I check before replacing HCZZ0039-2?

The primary risk is mechanical incompatibility. Always verify the PCB footprint, connector height, and housing dimensions from the datasheet's mechanical drawing before committing to a substitute to avoid assembly issues.

HCZZ0039-2 Alternatives, Datasheet & Cross Reference | Shenzhen Hongcheng Electronics Co., Ltd.

HCZZ0039-2 is a 2-pin, 1.0mm pitch vertical SMT header. Several alternative connectors are available with matching electrical ratings, but require careful verification of mechanical drawings to ensure PCB footprint compatibility.

AI replacement insight

Electrical risklow

Several candidates match the 50V/1A rating.

Package riskmedium

Requires verification of the mechanical drawing and PCB footprint before substitution.

Can it be replaced directly?

No drop-in replacement is confirmed. WF-1E100A2P is a strong candidate that requires a mechanical drawing review to ensure it fits your PCB layout.

Best replacement path

Use a vertical 1.0mm 2-pin header like WF-1E100A2P after verifying its PCB footprint against your design.

Main risk

The primary risk is a mismatch in the PCB solder pad layout (footprint), which is common even among dimensionally similar connectors.

Recommended alternatives

A strong alternative with matching orientation and electrical ratings; verify footprint.

View details

Alternative comparison matrix

Feature / factor	HCZZ0039-2	WF-1E100A2P	A1002WV-S-2P	Compatibility / risk
Package	Vertical SMT	Vertical SMT	Vertical SMT	Vertical SMT — Orientation matches target. Package name differs but describes same form.; A1002WV-S-2P: Orientation matches target.
Pitch	1.0mm	1.0mm	1.0mm	1.0mm — Pitch matches.; A1002WV-S-2P: Pitch matches.
Current	1A	1A	1A	1A — Current rating matches.; A1002WV-S-2P: Current rating matches.
Voltage	50V	50V	50V	50V — Voltage rating matches.; A1002WV-S-2P: Voltage rating matches.
Temperature	-25°C to +85°C	-25°C to +85°C	-	-25°C to +85°C — Operating temperature range matches.

Application & sourcing insights

Questions & answers

WF-1E100A2P and A1002WV-S-2P are strong candidates with matching electrical specs and vertical orientation. However, you must verify the PCB footprint from their datasheets before use.