What should engineers review before using IM03TS?

Check the 2 A contact limit, 220 VDC/250 VAC maximum switching voltage, DC load derating, coil drive requirements, 8-pin PCB layout, and the required insulation level.

What is the pinout of IM03TS?

Use the IM03TS datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about IM03TS pinout to locate pins, power rails, and interface signals before layout.

IM03TS Datasheet, Specs, Alternatives & ECAD | TE Connectivity / Axicom

AI summary

IM03TS is a compact TE Connectivity AXICOM DPDT signal relay with a 5 VDC, 140 mW monostable coil and THT standard terminals.

Best for

Compact signal switching
Telecommunication and control interfaces
Through-hole boards requiring DPDT contacts

Avoid if

The application exceeds the relay's switching capacity
A surface-mount package or latching operation is required

Check before use

Load type and DC arc-breaking capability
5 V coil drive and 140 mW coil power
Terminal assignment and PCB spacing

Key specifications

Coil: 5 VDC monostable, 140 mW
Contacts: 2 form C / DPDT, 2 A
Switching voltage: 220 VDC / 250 VAC
Package: THT standard, 10.00 mm × 6.00 mm × 5.65 mm

Compliance & Environment

RoHS: Y

Application

Telecommunication equipmentIndustrial controlMeasurement equipment

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

IM03TS is a TE Connectivity AXICOM IM-series, 2 form C (DPDT) non-latching signal relay with a 5 VDC monostable coil and standard through-hole terminals.