INA333AIDGKR AI Analysis:
Datasheet, Specs, Alternatives & ECAD

Gain is set by a single external resistor (RG) connected between pins 1 and 8, using the formula G = 1 + (100kΩ/RG).

It features 25µV max offset voltage, 0.1µV/°C drift, 100dB CMRR, and a low 50µA quiescent current.

Keep traces short, use a ground plane, and place bypass capacitors close to the supply pins. Avoid parasitic capacitance at the RG pins.

The device operates from 1.8V to 5.5V (single supply) or ±0.9V to ±2.75V (dual supply).

Check lifecycle (Active), compliance data, distributor availability, and approved-source coverage. Current sourcing signal: Low; readiness: high_availability.

Use the INA333AIDGKR datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about INA333AIDGKR pinout to locate pins, power rails, and interface signals before layout.