Pricing

LM2937ES-5.0RG AI Analysis:
Datasheet, Specs, Alternatives & ECAD

AI summary

LM2937ES-5.0RG product

LM2937ES-5.0RG

Integrated Circuits (ICs)

5 V LDO500 mATO-263-3DDPAKLinear regulatorAutomotive

LM2937ES-5.0RG is a fixed 5 V, 500 mA low-dropout linear regulator in a TO-263-3 package for automotive, industrial-control and point-of-load rails.

Best for

  • 5 V rails up to 500 mA
  • Automotive input environments with transient exposure
  • Industrial point-of-load regulation

Avoid if

  • An enable or shutdown control pin is required
  • High input-to-output voltage drop causes excessive thermal dissipation
  • Input voltage must continuously exceed 26 V

Check before use

  • 10 µF minimum output capacitance over the full operating temperature range
  • Output capacitor ESR no greater than 3 Ω
  • TO-263 thermal layout and junction-temperature margin
  • Input transient and reverse-battery conditions

Key specifications

Output voltage
5 V fixed
Maximum output current
500 mA
Continuous input voltage
26 V maximum
Dropout voltage
0.5 V typical at 500 mA
Package
TO-263-3 / DDPAK

Compliance & Environment

RoHS
RoHS

Application

Automotive power railsIndustrial controlPoint-of-load regulation

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

LM2937ES-5.0RG is an HGC fixed-output positive linear LDO regulator. It provides a nominal 5 V output and is supplied in a three-pin TO-263-3/DDPAK package with the tab internally connected to ground.