What are the key specifications of LZ1H4R7M0506?

The part has a Ø5 mm × 5.7 mm package, -55°C to +105°C operating range, 2000-hour endurance at 105°C rated voltage, 50 mArms ripple current at 100 kHz/105°C, 3.00 Ω impedance at 100 kHz/20°C, and tan δ of 0.14 at 120 Hz/20°C.

What is the pinout of LZ1H4R7M0506?

Use the LZ1H4R7M0506 datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about LZ1H4R7M0506 pinout to locate pins, power rails, and interface signals before layout.

LZ1H4R7M0506 Datasheet, Specs, Alternatives & ECAD | JARSON

AI summary

LZ1H4R7M0506 is a 50 V, 4.7 µF SMD aluminum electrolytic capacitor in the JARSON LZ series, supplied in a Ø5 mm × 5.7 mm package.

Best for

Compact 50 V bulk or local decoupling positions
General low-impedance SMD aluminum electrolytic applications within rated ripple current

Avoid if

A non-polar capacitor is required
The design requires lower impedance or higher ripple current than the stated rating
The available 5.7 mm component height is unacceptable

Check before use

Observe aluminum electrolytic capacitor polarity
Confirm reflow profile compatibility
Check capacitance derating, ripple heating, and impedance over the intended temperature range