For BusinessPricing
Request a demo

MAX660CSA+T-TUDI AI Analysis:
Datasheet, Specs, Alternatives & ECAD

AI summary

MAX660CSA+T-TUDI product

MAX660CSA+T-TUDI

Component

charge pumpvoltage invertervoltage doublerMAX660 compatibleSO-8

MAX660CSA+T-TUDI is an 8-pin switched-capacitor converter that creates an unregulated negative rail from a positive supply or approximately doubles a positive input voltage.

Best for

  • Generating a small negative supply from a 1.5 V to 5.5 V rail
  • Low-component-count voltage doubling
  • Moderate-current auxiliary power rails

Avoid if

  • A tightly regulated output voltage is required
  • Input voltage exceeds 5.5 V in normal operation
  • An inductor-based converter is required for lower ripple or higher power

Check before use

  • Confirm output voltage at the intended load current
  • Use low-ESR C1 and C2 capacitors
  • Verify exact suffix package, compliance, and qualification requirements

Key specifications

Converter modes
Inverter or positive doubler
Input range, inverter
1.5 V to 5.5 V with LV = GND
Input range, doubler
2.5 V to 5.5 V
Output current
100 mA
Oscillator options
10 kHz or 80 kHz typical

Compliance & Environment

RoHS
-
REACH
-
MSL
-
ECCN
-
HTSUS
-

Application

Auxiliary negative power railsBattery-powered instrumentsOperational-amplifier supply generation

Datasheet

7f4ba096a63231952a569b266ce90b16_MAX660CSA+T-TUDI.pdf

800 KB

Datasheet AI

CAD Models

Download ECAD models for MAX660CSA+T-TUDI: KiCad symbol & footprint, Altium footprint, PCB footprint, and 3D model.

EDA Symbol
Schematic symbol for your EDA tool
Get Files
PCB Footprint
Land pattern for PCB layout
Get Files
3D Model
STEP file for mechanical design
Get Files
KiCad Library
Verified KiCad 8 symbol, footprint, and 3D model
Generate library

Login required · CAD models billed separately as an add-on

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

It is a MAX660-compatible CMOS charge-pump IC for voltage inversion or positive voltage doubling. The device uses two external capacitors for the basic converter circuit.