MHT136CRCT AI Analysis:
Datasheet, Specs, Alternatives & ECAD

It operates at a typical forward current of 5mA, with a forward voltage between 1.7V and 2.2V and a luminous intensity of 18-36 mcd.

The LED is moisture-sensitive. It should be stored in a moisture-proof bag at <30°C and <60% RH. If the storage time is exceeded, baking at 60±5°C for 24 hours is required.

Reflow soldering is recommended at 260°C for a maximum of 10 seconds. Do not exceed two reflow cycles and avoid applying mechanical stress to the LED during heating.

Check lifecycle (Active), compliance data, distributor availability, and approved-source coverage. Current sourcing signal: Low; readiness: easy.

Use the MHT136CRCT datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about MHT136CRCT pinout to locate pins, power rails, and interface signals before layout.