Pricing

MIC5232-2.5YD5-TR AI Analysis:
Datasheet, Specs, Alternatives & ECAD

AI summary

MIC5232-2.5YD5-TR product

MIC5232-2.5YD5-TR

Integrated Circuits (ICs)

2.5 V LDO10 mAultra-low quiescent currentTSOT-23-5standby power

MIC5232-2.5YD5-TR is a fixed 2.5 V, 10 mA LDO intended for very low-power standby, backup, and keep-alive rails.

Best for

  • Real-time clock backup rails
  • SRAM or flash keep-alive supplies
  • Very low-current standby rails

Avoid if

  • Output current exceeds 10 mA
  • Input voltage can fall below 2.7 V
  • A regulated output other than 2.5 V is required

Check before use

  • Worst-case dropout at load current
  • TSOT-23-5 PCB footprint and pin orientation
  • Output-capacitor value and placement
  • Lifecycle and supply status

Key specifications

Fixed output
2.5 V
Maximum output current
10 mA
Input range
2.7 V to 7.0 V
Quiescent current
1.8 uA typical
Output capacitor
0.47 uF minimum

Compliance & Environment

RoHS
Y

Application

Backup power railsLow-power memory retentionReal-time clocks

Where to Buy

Real-time and catalog pricing from verified distributors

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

It is a fixed 2.5 V CMOS low-dropout linear regulator rated for up to 10 mA output current. The documented package is TSOT-23-5, with an active-high enable input.