What should engineers review before using NDP1324KC?

Check the 30 V maximum operating input requirement, programmable current-limit resistor value, inductor saturation margin, capacitor ESR and ripple-current capability, thermal rise, and SOP-8 PCB layout. The datasheet recommends a parallel TVS diode when a solid or ceramic input capacitor is used.

What is the pinout of NDP1324KC?

Use the NDP1324KC datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about NDP1324KC pinout to locate pins, power rails, and interface signals before layout.

NDP1324KC Datasheet, Specs, Alternatives & ECAD | NDP(芯潭微)

AI summary

NDP1324KC is an SOP-8 synchronous buck regulator for converting 7 V to 30 V inputs to an adjustable output as low as 3.6 V, with up to 2.4 A continuous load capability.

Best for

Low-frequency 130 kHz buck converters
Car charger power stages
Portable and distributed-power applications

Avoid if

Input voltage exceeds 30 V during normal operation
An output voltage below 3.6 V is required
Documented compliance or lifecycle data is mandatory without further supplier confirmation

Check before use

Confirm output-voltage divider values using the 1.0 V feedback reference
Set and test the ILIMT resistor for the required protection level
Verify junction temperature at maximum VIN and load current

Key specifications

Input voltage: 7 V to 30 V
Output current: 2.4 A continuous
Topology: Synchronous buck converter
Switching frequency: 130 kHz
Package: SOP-8

Application

Car chargersDistributed power systemsPortable rechargeable devices

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

NDP1324KC is a monolithic synchronous step-down DC/DC converter from NDP. It accepts 7 V to 30 V input, provides an adjustable output down to 3.6 V, and supports up to 2.4 A continuous output current.