What should engineers review before using NDP13301KC?

Confirm that the 4.6 V to 30 V input range covers the system supply and expected transients. Select an inductor that will not saturate at peak current, verify capacitor ripple-current capability and ESR, and evaluate junction temperature at maximum input voltage and load.

What is the pinout of NDP13301KC?

Use the NDP13301KC datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about NDP13301KC pinout to locate pins, power rails, and interface signals before layout.

NDP13301KC Datasheet, Specs, Alternatives & ECAD | NDP(芯潭微)

AI summary

NDP13301KC is an SOP-8 synchronous buck regulator for converting 4.6 V to 30 V inputs to an adjustable 3.3 V to 25 V output at up to 3.0 A continuous load.

Best for

Adjustable buck supplies up to 3.0 A
Car charger power stages
Portable and distributed power equipment

Avoid if

Input transients may exceed the 33 V absolute maximum rating without protection
Compliance or lifecycle documentation is mandatory but unavailable

Check before use

Inductor saturation current and ripple current
Input transient suppression, especially with ceramic input capacitors
Thermal rise at high VIN and maximum load

Key specifications

Input voltage: 4.6 V to 30 V
Output current: 3.0 A continuous
Output voltage: 3.3 V to 25 V adjustable
Switching frequency: 110 kHz
Package: SOP-8

Application

Car chargersDistributed power railsPortable equipment

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

NDP13301KC is a monolithic synchronous step-down DC/DC converter from NDP. It uses average-current-mode control and integrates high-side and low-side power MOSFETs in an SOP-8 package.