What should engineers review before using OH2EL89CFI-111YLC-25M?

Check the 5 V supply requirement, -40 °C to +85 °C operating range, 15 pF output-load condition, CMOS input compatibility, and the tri-state enable connection. The datasheet specifies a bypass capacitor of 0.01 µF to 0.1 µF or higher between VDD and GND.

What is the pinout of OH2EL89CFI-111YLC-25M?

Use the OH2EL89CFI-111YLC-25M datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about OH2EL89CFI-111YLC-25M pinout to locate pins, power rails, and interface signals before layout.

OH2EL89CFI-111YLC-25M Datasheet, Specs, Alternatives & ECAD | YXC

AI summary

OH2EL89CFI-111YLC-25M is a 25 MHz, 5 V CMOS crystal oscillator in a compact 3.2 mm × 2.5 mm 4-pin SMD package for industrial-control timing.

Best for

25 MHz clock generation in 5 V industrial-control electronics
Compact SMD designs requiring CMOS clock output
Circuits that use output enable or tri-state clock control

Avoid if

The design only provides a supply voltage other than 5 V
A frequency stability tighter than ±30 ppm is required without confirmation of the ordering specification
The receiving circuit cannot accept CMOS output levels

Check before use

Confirm the exact frequency tolerance associated with the ordered part
Verify the 15 pF output load requirement
Verify package orientation: pin 1 is tri-state, pin 2 is GND, pin 3 is output, and pin 4 is VDD