Pricing

REG1117-3.3-HXY AI Analysis:
Datasheet, Specs, Alternatives & ECAD

AI summary

REG1117-3.3-HXY product

REG1117-3.3-HXY

Voltage Regulators - Linear

3.3 V LDO800 mA regulatorSOT-223Bipolar linear regulatorThermal shutdown

REG1117-3.3-HXY is a fixed 3.3 V, 800 mA bipolar LDO in SOT-223 for post-regulation where approximately 1.3 V dropout at full load is acceptable.

Best for

  • 3.3 V post-regulation
  • Moderate-current linear rails
  • Boards with available thermal copper

Avoid if

  • Input headroom is below the required dropout margin
  • Low-loss or battery-efficiency requirements dominate
  • PCB area cannot support heat dissipation

Check before use

  • Worst-case VIN, VOUT, and load-current headroom
  • SOT-223 thermal layout and junction temperature
  • 10 µF input and output capacitor implementation

Key specifications

HX

Manufacturer

HXY MOSFET
Output voltage
3.3 V nominal; 3.234 V to 3.366 V specified
Maximum output current
800 mA
Dropout voltage
1.3 V typical at 800 mA; 1.5 V maximum
Package
SOT-223, 3 pins
Input voltage
15 V maximum operating; 18 V absolute maximum

Compliance & Environment

RoHS
-
REACH
-
MSL
-
ECCN
-
HTSUS
-

Application

Post-regulation of switching suppliesComputer and graphics boardsLCD monitor and TV power rails

CAD Models

Generate a KiCad symbol, footprint, and 3D model for REG1117-3.3-HXY.

Loading CAD preview

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

REG1117-3.3-HXY is a fixed-output 3.3 V bipolar low-dropout linear regulator from HXY MOSFET. It is supplied in a 3-pin SOT-223 package and is specified for up to 800 mA output current.