Pricing

SN65HVD235DR-JSM AI Analysis:
Datasheet, Specs, Alternatives & ECAD

AI summary

SN65HVD235DR-JSM product

SN65HVD235DR-JSM

Drivers

CAN transceiver3.3 VISO 11898SOP-8Auto-baud loopbackSlope control

SN65HVD235DR-JSM is a 3.3 V SOP-8 CAN transceiver for ISO 11898-compatible differential CAN buses, with adjustable slew rate and an auto-baud loopback mode.

Best for

  • 3.3 V CAN controller interfaces
  • Industrial CAN nodes requiring slope control
  • CAN baud-rate detection using listen-only loopback

Avoid if

  • Applications requiring a documented automotive qualification
  • Designs needing confirmed operation above 1 Mbps without manufacturer clarification
  • Systems requiring an isolated CAN interface

Check before use

  • Connect 120 Ω termination only at both physical bus ends
  • Set RS low for high-speed mode or use a 10 kΩ to 100 kΩ resistor to ground for slope control
  • Keep AB low or open for normal operation; drive AB high for auto-baud loopback
  • Place a 100 nF ceramic decoupling capacitor close to VCC

Key specifications

JS

Manufacturer

JSMSEMI
Supply voltage
3 V to 3.6 V
CAN rate
Up to 5 Mbps stated in features
Bus common-mode range
-7 V to 12 V
Bus fault protection
Greater than ±40 V
Operating temperature
-40 °C to 125 °C
Package
SOP-8, 8 pins

Compliance & Environment

RoHS
RoHS
REACH
-
MSL
3
ECCN
-
HTSUS
-

Application

Industrial automationMotor and robot controlCAN connectivity

CAD Models

Generate a KiCad symbol, footprint, and 3D model for SN65HVD235DR-JSM.

Loading CAD preview

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

SN65HVD235DR-JSM is a JSMSEMI 3.3 V differential CAN bus transceiver in an 8-pin SOP package. It interfaces a CAN controller transmit/receive logic interface to CANH and CANL bus lines.