SN74LVC1G125DCKR AI Analysis:
Datasheet, Specs, Alternatives & ECAD

The OE (Output Enable) pin controls the 3-state output. When OE is high, the output is disabled (high-impedance state); when OE is low, the output follows the input.

Yes, the device includes Ioff circuitry, which prevents damaging current backflow when the device is powered down, supporting live insertion and partial power-down modes.

It supports a wide VCC range (1.65V to 5.5V), provides ±24mA output drive at 3.3V, and has a maximum propagation delay of 3.7ns at 3.3V.

The device is currently active and widely available, with a standard MSL Level 1 rating, indicating no special moisture sensitivity precautions are required.

Check lifecycle (Active), compliance data, distributor availability, and approved-source coverage. Current sourcing signal: Low; readiness: easy.

Use the SN74LVC1G125DCKR datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about SN74LVC1G125DCKR pinout to locate pins, power rails, and interface signals before layout.