What should engineers review before using SX3B32.000F0810F30?

Review the 8 pF specified load capacitance, 30 Ω maximum ESR for the 20 MHz to 54 MHz range, 100 µW maximum drive level, ±10 ppm initial tolerance, and ±30 ppm frequency drift requirement.

What is the pinout of SX3B32.000F0810F30?

Use the SX3B32.000F0810F30 datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about SX3B32.000F0810F30 pinout to locate pins, power rails, and interface signals before layout.

SX3B32.000F0810F30 Datasheet, Specs, Alternatives & ECAD | SCTF

AI summary

SX3B32.000F0810F30 is a 32 MHz, 8 pF fundamental AT-cut SMD quartz crystal for designs requiring a 3.2 mm × 2.5 mm package and -40°C to +85°C operation.

Best for

32 MHz MCU clock circuits
Compact industrial electronics
Portable and wireless electronic modules

Avoid if

The oscillator requires a load capacitance other than 8 pF
A guaranteed lifecycle or MSL classification is required from the available source data
The circuit cannot support up to 30 Ω crystal ESR

Check before use

Verify the oscillator IC supports a 32 MHz fundamental crystal.
Calculate effective external load capacitance for an 8 pF crystal specification.
Keep crystal drive level at or below 100 µW.
Confirm the 3.2 mm × 2.5 mm four-pad land pattern.