Pricing

TCAN3403DDFRQ1 AI Analysis:
Datasheet, Specs, Alternatives & ECAD

AI summary

TCAN3403DDFRQ1 product

TCAN3403DDFRQ1

Drivers

CAN FDAutomotiveAEC-Q1003.3 V1.8 V logic compatibleStandby wakeSOT-23-8

TCAN3403DDFRQ1 is an AEC-Q100 3.3 V CAN FD transceiver for automotive nodes needing 1.8 V, 2.5 V, or 3.3 V controller I/O compatibility through its VIO pin.

Best for

  • AEC-Q100 automotive CAN or CAN FD nodes
  • Controllers using 1.8 V, 2.5 V, or 3.3 V I/O
  • Low-power standby nodes requiring CAN-bus wake detection

Avoid if

  • A 5 V-only local logic interface is required without level translation
  • CAN wake-up is required during a full device shutdown state
  • Network timing has not been validated for the intended CAN FD rate

Check before use

  • Confirm VIO and MCU logic thresholds
  • Validate termination and network timing at the target data rate
  • Review system transient and ESD protection at the connector

Key specifications

TE

Manufacturer

Texas Instruments
VCC supply
3.0 V to 3.6 V
VIO supply
1.7 V to 3.6 V
CAN FD capability
Up to 8 Mbps in simpler networks
Bus fault protection
±58 V
Package
8-pin SOT-23-THIN (DDF)

Compliance & Environment

RoHS
Yes
REACH
-
MSL
Level-1-260C-UNLIM
ECCN
-
HTSUS
-

Application

Automotive body control modulesAutomotive gatewaysADAS and infotainment CAN networks

Datasheet

CAD Models

Generate a KiCad symbol, footprint, and 3D model for TCAN3403DDFRQ1.

Loading CAD preview

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

TCAN3403DDFRQ1 is the 8-pin thin SOT-23 version of TI's TCAN3403-Q1 automotive CAN FD transceiver. It converts controller TXD/RXD logic to the CANH/CANL differential bus and supports a separate 1.7 V to 3.6 V VIO logic supply.