What should engineers review before using TLV74315PDBVR-MS?

Check dropout at the required load, because the typical dropout for the 1.5 V version is 0.36 V at 300 mA. Use an input capacitor of at least 1 µF close to VIN and GND, and use a 1 µF to 22 µF output capacitor with ESR of at least 1 mΩ close to VOUT and GND.

What is the pinout of TLV74315PDBVR-MS?

Use the TLV74315PDBVR-MS datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about TLV74315PDBVR-MS pinout to locate pins, power rails, and interface signals before layout.

TLV74315PDBVR-MS Datasheet, Specs, Alternatives & ECAD | MSKSEMI

AI summary

TLV74315PDBVR-MS is a fixed 1.5 V, 300 mA low-quiescent-current LDO for compact low-power rails. It supports EN shutdown and uses a SOT-23-5 package.

Best for

1.5 V rails in battery-powered equipment
Low-power portable electronics
Microprocessor and wireless accessory rails

Avoid if

The source voltage cannot maintain sufficient headroom above 1.5 V at peak load
A switching regulator is required for higher conversion efficiency at large VIN-to-VOUT differences
Documented automotive or safety qualification is required