What are the primary applications for this op amp?

It is suitable for general-purpose applications including sensor signal conditioning, low-side current sensing, motor control, and wearable devices.

What are the key electrical specifications?

Key specs include a 1.8V to 5.5V supply range, 0.3mV input offset voltage, 10-MHz gain bandwidth, and 6.5V/µs slew rate.

What should be considered during PCB layout?

Place 0.1µF bypass capacitors close to the supply pins and keep input traces short and away from noisy output or supply lines to minimize parasitic coupling.

What is the pinout of TLV9062IDGKR?

Use the TLV9062IDGKR datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about TLV9062IDGKR pinout to locate pins, power rails, and interface signals before layout.

TLV9062IDGKR Datasheet, Specs, Alternatives & ECAD | Texas Instruments

AI summary

The TLV9062IDGKR is a dual-channel, 10-MHz, rail-to-rail input/output operational amplifier optimized for low-voltage, cost-sensitive applications.

Best for

Low-voltage sensor signal conditioning
Battery-powered wearable devices
Cost-sensitive industrial control

Avoid if

Applications requiring supply voltages above 5.5V
High-precision applications requiring sub-microvolt offset

Check before use

Input common-mode voltage range
Capacitive load stability

Key specifications

Channels: 2
Bandwidth: 10 MHz
Supply Voltage: 1.8V - 5.5V
Offset Voltage: 0.3 mV

Compliance & Environment

RoHS: ROHS3 Compliant
REACH: -
MSL: Level-2-260C-1 YEAR
ECCN: EAR99
HTSUS: 8542.33.0001

Application

Sensor Signal ConditioningMotor ControlWearable Devices

Datasheet

cfc40cb553e96e03dd2cefad6f75d6ba.pdf

800 KB

Datasheet AI

CAD Models

Download ECAD models for TLV9062IDGKR: KiCad symbol & footprint, Altium footprint, PCB footprint, and 3D model.

EDA Symbol

Schematic symbol for your EDA tool

Get Files

PCB Footprint

Land pattern for PCB layout

Get Files

3D Model

STEP file for mechanical design

Get Files

KiCad Library

Verified KiCad 8 symbol, footprint, and 3D model

Generate library

Where to Buy

Real-time and catalog pricing from verified distributors

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

It is a dual-channel CMOS operational amplifier from Texas Instruments, featuring rail-to-rail input and output capabilities and a 10-MHz bandwidth.

AI summary

Best for

Avoid if

Check before use

Key specifications

Compliance & Environment

Application

Datasheet

CAD Models

Where to Buy

Alternative components

Design and risk insights

Questions & answers

What is the TLV9062IDGKR?+×

What are the primary applications for this op amp?+×

What are the key electrical specifications?+×

What should be considered during PCB layout?+×

What is the pinout of TLV9062IDGKR?+×