What should engineers review before using TM100604N-280-P?

Review the 80 mΩ maximum DCR, 5.0 A maximum current specification, the 1 kHz test condition, the four-pin PCB footprint, and temperature limits of -40 °C to 125 °C.

What is the pinout of TM100604N-280-P?

Use the TM100604N-280-P datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about TM100604N-280-P pinout to locate pins, power rails, and interface signals before layout.

TM100604N-280-P Datasheet, Specs, Alternatives & ECAD | MINGSTAR(登壹)

AI summary

TM100604N-280-P is a 28 µH toroidal coil inductor with ±35% tolerance, 80 mΩ maximum DCR, and 5.0 A maximum current specification.

Best for

Low-frequency power filtering
Toroidal coupling or EMI suppression

Avoid if

A tightly controlled inductance tolerance is required
The design requires verified compliance or lifecycle data

Check before use

Current derating and temperature rise
Actual footprint and lead spacing
Inductance at the intended operating current

Key specifications

Inductance: 28 µH ±35%
Maximum DCR: 80 mΩ
Maximum current: 5.0 A
Configuration: Two windings, 5 turns reference each

Application

Power filteringEMI suppression

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

It is a MINGSTAR toroidal coil inductor with two windings, 28 µH nominal inductance, ±35% tolerance, and four through-hole pins.