What should engineers review before using TM100605N-152-W?

Check the 2.0 A maximum IDC limit, 58 mOhm maximum DCR for each winding, terminal numbering and phasing, and the through-hole pad layout. The datasheet specifies operation from -40 C to +125 C.

What is the pinout of TM100605N-152-W?

Use the TM100605N-152-W datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about TM100605N-152-W pinout to locate pins, power rails, and interface signals before layout.

TM100605N-152-W Datasheet, Specs, Alternatives & ECAD | MINGSTAR(登壹)

AI summary

TM100605N-152-W is a 4-terminal through-hole toroidal coil inductor with two 1.5 mH minimum windings and 2.0 A maximum DC current.

Best for

Through-hole magnetic assemblies requiring two 1.5 mH windings
Applications within a 2.0 A maximum DC-current limit

Avoid if

Compliance or lifecycle documentation is mandatory
A single-winding inductor is required

Check before use

Confirm winding polarity and schematic connection
Confirm PCB hole pattern and lead clearance
Confirm temperature rise under the intended current

Key specifications

Inductance: 1.5 mH min per winding at 1 kHz, 0.25 V
DC resistance: 58 mOhm max per winding
DC current: 2.0 A max
Operating temperature: -40 C to +125 C

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

TM100605N-152-W is a MINGSTAR 4-terminal toroidal coil inductor. Its two specified windings, terminals 1-2 and 4-3, are each rated at 1.5 mH minimum.