What should engineers review before using TM100605N-302-B-002?

Check the 2.0 A maximum DC current, 60.0 mOhm maximum DCR per winding, +/-35% inductance tolerance, winding phasing, and the documented mechanical dimensions.

What is the pinout of TM100605N-302-B-002?

Use the TM100605N-302-B-002 datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about TM100605N-302-B-002 pinout to locate pins, power rails, and interface signals before layout.

TM100605N-302-B-002 Datasheet, Specs, Alternatives & ECAD | MINGSTAR(登壹)

AI summary

TM100605N-302-B-002 is a four-terminal MINGSTAR toroidal coil inductor with two 3.0 mH windings and a 2.0 A maximum DC current rating.

Best for

Coupled-winding inductive circuits requiring 3.0 mH nominal winding inductance

Avoid if

A tightly controlled inductance tolerance is required
Compliance or lifecycle status must be documented

Check before use

Verify schematic winding polarity and terminal assignment
Validate board clearances against A1, A2, B, C, D1, and D2 dimensions

Key specifications

Inductance: 3.0 mH +/-35% per winding at 10 kHz, 50 mV
DC resistance: 60.0 mOhm maximum per winding
DC current: 2.0 A maximum
Terminals: 4
Operating temperature: -25 C to +85 C

Application

Power inductive circuitsIndustrial electronics

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

It is a MINGSTAR toroidal coil inductor with terminals 1-2 and 4-3 forming two specified 3.0 mH windings.