What should engineers review before using TM100605N-451-P?

Review the four-terminal winding arrangement, the stated mechanical dimensions, the 15 mΩ maximum winding resistance, and the 5.0 A maximum RMS current condition.

What is the pinout of TM100605N-451-P?

Use the TM100605N-451-P datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about TM100605N-451-P pinout to locate pins, power rails, and interface signals before layout.

TM100605N-451-P Datasheet, Specs, Alternatives & ECAD | MINGSTAR(登壹)

AI summary

TM100605N-451-P is a four-terminal toroidal inductor with two 450 µH minimum windings and 5.0 A maximum RMS current.

Best for

PCB power filtering
Toroidal inductor applications requiring two windings

Avoid if

A verified compliance status or lifecycle declaration is required but unavailable

Check before use

Confirm the L1–2 and L3–4 winding connections
Confirm PCB geometry from the mechanical drawing
Check temperature rise at the intended RMS current

Key specifications

Inductance: 450 µH minimum per winding at 1 kHz, 0.25 V
DCR: 15 mΩ maximum per winding
RMS current: 5.0 A maximum at ΔT = 40 °C typical

Application

Power filteringIndustrial filtering

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

It is a PCB-mounted toroidal coil inductor with two windings. Each winding is specified at 450 µH minimum when measured at 1 kHz and 0.25 V.