What should engineers review before using TM100606N-402-B-L?

Check the four-lead layout, specified maximum dimensions, lead spacing, operating temperature range, and the application-specific current and saturation requirements. Compliance and lifecycle status are not provided.

What is the pinout of TM100606N-402-B-L?

Use the TM100606N-402-B-L datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about TM100606N-402-B-L pinout to locate pins, power rails, and interface signals before layout.

TM100606N-402-B-L Datasheet, Specs, Alternatives & ECAD | MINGSTAR(登壹)

AI summary

TM100606N-402-B-L is a four-lead, through-hole toroidal inductor with at least 4.0 mH inductance and a maximum specified DC current of 2.5 A.

Best for

Through-hole power filtering
Toroidal EMI suppression
Low-resistance inductive filtering

Avoid if

A surface-mount package is required
Certified compliance or lifecycle data is mandatory but unavailable

Check before use

Inductance and DCR at the intended operating current
PCB hole pattern and lead spacing
Thermal performance and current derating

Key specifications

Inductance: 4.0 mH minimum
Maximum DC current: 2.5 A maximum
DCR: 65.0 mΩ maximum
Mounting: Through-hole, 4 leads

Application

Power filteringEMI suppression

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

It is a MINGSTAR toroidal coil inductor for through-hole mounting. The specification requires at least 4.0 mH inductance and limits DCR to 65.0 mΩ maximum.