What should engineers review before using TMPA0605S-5R6MN-D?

Review the 10 A heat-rated-current limit, 8 A saturation-current limit, 28 mOhm typical DCR, PCB footprint, and the requirement that part temperature remain at or below 125 C.

What is the pinout of TMPA0605S-5R6MN-D?

Use the TMPA0605S-5R6MN-D datasheet for the official pinout diagram and pin names. In PartGenie, ask Datasheet AI about TMPA0605S-5R6MN-D pinout to locate pins, power rails, and interface signals before layout.

TMPA0605S-5R6MN-D Datasheet, Specs, Alternatives & ECAD | TAI-TECH(台庆)

AI summary

TMPA0605S-5R6MN-D is a shielded 5.6 uH SMD power inductor rated for 10 A thermal current and 8 A saturation current.

Best for

High-current DC/DC converters
FPGA and VRM power rails
Low-profile point-of-load converters

Avoid if

The application requires a known lifecycle status
The required current exceeds the thermal or saturation rating

Check before use

Inductance loss at peak current
Temperature rise with the final PCB and airflow
Recommended 8.0 mm × 3.4 mm land pattern

Key specifications

Inductance: 5.6 uH ±20%
Heat Rated Current: 10 A
Saturation Current: 8 A
DCR: 28 mOhm typical, 33 mOhm maximum

Compliance & Environment

RoHS: RoHS

Application

DC/DC power convertersFPGA and server VRM railsBattery-powered devices

Alternative components

Alternatives are being enriched. Analyze this part in PartGenie for the latest matches.

Design and risk insights

Questions & answers

It is a TAI-TECH shielded surface-mount power inductor in the TMPA0605 series, specified at 5.6 uH with ±20% inductance tolerance.